Home Mold Inspection & Testing Crawl Space Mold Inspection
Independent Mold Testing
Based in Falls Church · Serving Northern Virginia

Crawl Space Mold Inspection in Falls Church, VA

Clear the way to the crawl space hatch before we come, so we can reach every corner under the floor.

5.0/5 Stars on
Google Reviews
Lab Accredited third-party
lab analysis
Free Phone consultation
to start
5.0/5 on Google Verified homeowner reviews
A family relaxing in a bright living room, some on the sofa and some on the floor, for crawl space mold inspection in Falls Church, VA

"Bryce has always done an outstanding job for me. Always finds creative solutions to practical problems and gets the job done right the first time."

VSK House · Google review

A crawl space mold inspection in Falls Church covers the soil, the framing and the ducts under the floor, the part of the house few people see. In a house built before 1980, as 43.6 percent of Fairfax County's housing was (Census Bureau, 2020 to 2024), the crawl space may have had plumbers, electricians and HVAC installers working in it over the years, and any of those visits can leave the vapor barrier torn or pushed aside.

A musty smell in the rooms above is a common clue, because air moves up through the gaps around pipes and ducts. We go under the floor, measure what's wet and send samples to the lab when the readings leave a question open. Our mold inspection and testing page covers the other kinds of visit.

This page sits under our mold inspection & testing service.

Verified Reviews

In their own words.

5.0/5 stars on Google. Every review here is quoted word for word from Google. Read them all on our reviews page.

Clear the way to the access.

Tell us where the access is when you book: a hatch in a closet floor, a door in the foundation wall or a panel behind the stairs. Move stored boxes away from it, and if the outside door is behind shrubs, clear a path. Leave the crawl space itself as it is, so we see it the way it has been.

Check the barrier for tears and pooling.

We look at the soil first: standing water, damp patches, and whether the vapor barrier covers all of it and is sealed at the walls. Standing water on top of a barrier has come from above it, often a downspout or a leak.

A tide line on the block or a crust of silt on the soil shows where water has stood after heavy rain, even when the crawl space is dry on the day we visit.

Read the framing overhead.

We take moisture readings in the wood and compare damp areas with dry ones:

  • Floor joists and the underside of the subfloor
  • The sill plate where the framing sits on the foundation
  • Insulation between the joists that sags, drips or has fallen
  • Beams, piers and the rim joist beside each foundation vent

Trace the ducts and the dryer vent.

Air-conditioned supply ducts run colder than the crawl space air in summer, so a bare or poorly sealed duct can drip onto the insulation and joists beneath it. We follow the ducts, the supply and drain lines, and any dryer vent that ends under the house instead of outdoors.

If you know where the dryer vent ends, tell us. Warm, wet air and lint from a dryer venting under the floor can feed growth on the joists around the outlet.

Compare the air below with the rooms above.

When the readings leave a question open, we take air samples in the crawl space, the living area and outdoors, plus tape samples from the framing. Counts higher below than upstairs, and higher upstairs than outdoors, suggest the crawl space is feeding the house.

What the lab report tells you.

Samples go to an accredited third-party lab with no affiliation to EnviroPure. Air and tape results usually come back in 2 to 3 business days.

The report gives the spore count per cubic meter and the genus of what was found, compared against outdoor and baseline samples. It is written in plain language with clear next steps, and it is yours to keep.

Why EnviroPure

Why homeowners call us.

One lab for both rounds

If you go ahead with treatment, the clearance samples go to the lab that read these, so both sets come from one source.

Patented VaPURE, licensed provider

EnviroPure is a licensed provider of Pure Maintenance's patented VaPURE process.

Where this fits in mold inspection & testing.

This page covers one part of the job. The mold inspection & testing page covers the rest.

Frequently Asked

What homeowners ask us.

A crawl space isn't sealed from the house. Air moves up through gaps around pipes, wires and ducts, so a smell upstairs can start below.

A sealed crawl space can still take on water from a plumbing leak or a torn liner, so a smell or a stain is reason enough. Readings show whether it is staying dry.

We note how deep and where, read what we can reach, and put the water source first in our notes. A plumber or crawl space contractor deals with the water, and samples are more useful once it is gone.

Schedule Your Free Consultation

Ready to find out what you have?

Call or book online and we'll set up the first conversation.

Or call us directly 703-951-2400
Where We Work

Serving Falls Church & Northern Virginia.

We cover Northern Virginia and Montgomery County, MD: McLean, Fairfax, Tysons and Vienna in Fairfax County, Alexandria and Arlington, and Potomac, Chevy Chase and Bethesda on the Maryland side. Ask us about your street.

Fairfax County

Falls Church · McLean · Vienna · Tysons · Great Falls · Oakton · Annandale · Springfield · Fairfax

Taking bookings
Alexandria & Arlington

Alexandria · Old Town Alexandria · Kingstowne · Arlington · Crystal City · Ballston

Taking bookings
Montgomery County, MD

Bethesda · Potomac · Chevy Chase

Taking bookings
Service coverage
Northern Virginia · Montgomery County, MD