“Such great work, an honest company and professional. High recommend their services.”
Mold remediation in Falls Church, VA is the core of what EnviroPure Mold Services does, using Pure Maintenance's patented VaPURE™ process. In our ZIP code, 22043, about four in ten homes are detached houses and about as many are in multi-unit buildings, by Census Bureau estimates for 2020 to 2024, so we plan each job around the kind of home it is. An accredited third-party lab checks the result.
5.0/5 stars on Google. Read them all on our reviews page.
“Such great work, an honest company and professional. High recommend their services.”
“Ron gave us a lot of time on a free consultation about how we could remediate the few minor mold spots we thought were indicative of a larger problem. He was very helpful and honest, and didn't try to sell us any services because he thought we didn't need them.”
“Ron did great and solved the problem. I would 100% higher this company, highly recommend.”
“Very knowledgeable, thorough, professional. Answerered all our questions, detailed how any needs were determined and how to resolve mold issues.”
“EnviroPure Services were excellent and prompt. I heard back from my inquiry extremely quickly. The service technician, Ron, was very knowledgable and took care of my issues. I recommend their services to anyone!”
“They were great to work with. Ron was very kind, listened to our MANY questions and concerns, and helped with all of them. The service was great and we are excited to have this treated. We recommend it to all!”
Mold you can see often has company where you can’t: on the back of the drywall, inside the ductwork, under the floor in a crawl space. The VaPURE™ vapor treats those spaces along with the visible surfaces, and an independent lab measures the air before and after.
The VaPURE™ vapor reaches wall cavities, ductwork and the air as well as the surfaces you can see.
Walls, ceilings and floors usually stay in place. When a material is too far gone, we say so in the estimate and it comes out.
Air samples go to an accredited lab with no affiliation with EnviroPure, once before treatment and once after, and the report is yours.
When the whole property is treated and a follow-up lab test within a year shows mold above regional averages, we re-treat at no charge.
We find the leak, the damp crawl space or the poor ventilation behind the mold, because the protectant stage only helps once that cause is fixed.
We don't sell roofing, plumbing or HVAC work, so our notes name the trade your moisture problem needs, with no stake in the repair.
EnviroPure Mold Services is licensed to use Pure Maintenance's patented VaPURE™ process, which the U.S. Army Corps of Engineers has studied. Because the sterilant is a vapor, it settles on surfaces, mixes with the air and gets into wall cavities, HVAC and porous materials.
Here is how the VaPURE™ process compares with cutting out the damaged material, scrubbing it yourself and running an ozone machine.
Apartment buildings, condominiums and commercial properties get the VaPURE™ process and the lab check we use in houses, planned around tenants and boards. Our commercial mold remediation page explains how those jobs are scoped.
Book Free ConsultationThe VaPURE™ process has four steps: inspect, treat, inhibit regrowth and prove the result with a lab test.
We walk the property, map moisture and look for the source that is feeding the mold. Where testing is needed, baseline air samples go to an accredited third-party lab.
The VaPURE™ sterilant travels as a vapor to surfaces, wall cavities, HVAC, porous materials and the air. People, pets and plants are out of the house until it’s finished.
An antimicrobial protectant goes on next. It helps surfaces resist new growth once the moisture cause is fixed.
Post-treatment air samples go to the same accredited lab. Your written report compares them with the outdoor and baseline samples.
What happens at each visit, and what you get from it.
Free visual inspection
Water that comes in during a downpour can sit inside a wall or under a floor long after the room looks dry. On 8 July 2019, about a month’s rain fell on the region in a couple of hours, and Pimmit Run flooding closed the 1300 block of Kirby Road in McLean. If your house took water that day, or in any storm since, tell us where it came in, because that is where we map moisture first.
We walk the property and map moisture to find the source, then fit the treatment to what we find. The consultation and visual inspection are free, and when the inspection confirms visible mold, you get an estimate. If there’s no visible mold but you still have concerns, air quality testing with a report from a third-party lab puts numbers on the question.
Single-day treatment
The sterilant goes out as a fine vapor and reaches surfaces, wall cavities, HVAC, porous materials and the air. Furniture and electronics generally stay where they are. Nobody stays inside during treatment: people, pets and plants leave, and you come back when it’s finished, usually the same evening.
Roof water leads to attic mold removal and ceiling mold removal. Ground water and floods lead to basement mold removal, crawl space mold removal, carpet mold removal and water damage mold removal. Steam and plumbing leaks lead to bathroom mold removal, shower mold removal and wall mold remediation, and a backed-up condensate drain to HVAC mold removal.
Protectant stage
After the vapor, we apply an antimicrobial protectant that helps surfaces resist new growth.
It helps once the moisture cause is fixed, so your inspection notes name that cause, whether it is a plumbing leak, water in a crawl space or a bathroom without enough ventilation.
Third-party verified
Post-treatment air samples go to the same accredited lab that tested before, and the lab has no affiliation with EnviroPure. Results usually come back in 2 to 3 business days. The report gives the spore count per cubic meter and the genus, compares them with the outdoor and baseline samples, and explains it all in plain language.
The U.S. Army Corps of Engineers studied the VaPURE™ process. You can read its report and the other papers yourself, and our science page explains each one.
The Army’s Engineer Research and Development Center evaluated the VaPURE™ application system in two occupied buildings at Fort Campbell, Kentucky, and checked them again six months later.
A compiled set of laboratory test reports on vapor peracetic acid (VPA), the chemistry the VaPURE™ process uses.
A technical explainer of why the treatment behaves like a gas and reaches places surface cleaning can’t.
Yes. People, pets and plants all leave before treatment starts, and the house stays empty until it’s finished. Most homes are treated in a single day, and most families are back the same evening.
It depends on the size of the property and what is causing the mold. The first step is free: a consultation and a visual inspection, with an estimate when visible mold is confirmed. Most homes need no demolition, which keeps rebuild work out of most estimates.
No. Furniture and electronics generally stay where they are. If you have something you’re unsure about, mention it during the walk-through.
The vapor treats the mold present on the day, and the protectant stage helps resist new growth once the moisture cause is fixed. Our 1-year re-treat warranty applies when the whole property is treated: if a follow-up lab test within a year shows mold above regional averages, we re-treat at no charge.
Conventional remediation scrapes, cuts out and replaces the material where mold is visible. The VaPURE™ process uses a vapor that behaves like a gas and reaches porous materials, wall cavities and HVAC, so most homes need no demolition. An independent lab then checks the air.
The first step is a free phone consultation. We’ll talk through why the mold is there, what fixing it involves, and the earliest visit we can offer.
Head back to EnviroPure Mold Services in Falls Church, VA, or browse every service we offer in Falls Church, VA.
Our service area starts in Falls Church and runs through Fairfax County (Fairfax, Annandale, Oakton and Vienna) to Alexandria, Arlington and Chevy Chase, Bethesda and Potomac, MD. See every area we serve.
Falls Church · McLean · Vienna · Tysons · Great Falls · Oakton · Annandale · Springfield · Fairfax
Alexandria · Old Town Alexandria · Kingstowne · Arlington · Crystal City · Ballston
Bethesda · Potomac · Chevy Chase