“I had an end unit townhome on the market for sale and the first contract was voided after the home inspection revealed there was moisture inside the vanity in the lower level powder room. I called in Bryce Rogers to evaluate what was going on and he was the ultimate professional. Using a thermal imaging camera, he was able to detect exactly where the water was getting into the foundation and eliminate the rest of the room. So we did not have to do a full rehab. He suggested a general contractor he has worked with over the years, Ron Payne, and his crew removed the old vanity and opened the wall behind it. See photos. Bryce and Ron evaluated what they found behind the open wall and determined what needed to be done to seal the wall and leave the powder room dry. Once that work was finished, it was time to remediate the mold. The buyer's mold company wanted to tear everything out and rebuild, at a cost of 3-4 times higher than Pure Maintenance DC to treat the area. Then the buyer's mold company came in to do an air quality test and had results back in a couple of days. Mold was everywhere!!! But Pure Maintenance had also taken air samples and sent them to a lab that actually put them into a perfect growing environment, to see if there were any LIVE mold spores. Not a single one. The other mold test simply looked at the mold spores and determined they were there - but not if they were active and alive.”
